Table of Contents
Advertisement
Advancedfeatures
1 3 9
Using Inter _ WiDi / wireless displ
To exit Intel :_WiDi / wireless display:
Exit Intel '_Wireless Display by pushing the disconnect button on Intet:_'
WiDi software on the device or by pressing the EXIT button on the TV
remote control.
NOT£
If thedevice hasbeeninactive for sometime,the Intel ®WiDi connection
will bedisconnected a utomatically.
Changing the Intel ® WiDi DeviceName
The TV's Intet_'WiDi device name can be changed.
1
Press the MENU button.
2
Select Network > Network Device Setup >Inte[ _ WiDi / wireless
display Setup and press the OK button.
3
Press the A/Y (arrow) buttons to select Inte[ _ WiDi / wireless
display Device Name and press the OK button.
4
Select Device Name and press the OK button.
The Software Keyboard window will appear.
5
Input the Intet _'WiDi device name by using the software keyboard.
Press the GREEN button.
6
Select Done and press the OK button to save your setting.
DeviceList
Device List displays a list of MAC addresses for previously connected
devices that have been connected before. The nmxinmm number that can
be stored is 20.
If the list runs out of space, the least-recently-used
MAC address wilt be
deleted and the new MAC address wilt be added automatically.
1
Press the MENU button.
2
Select Network > Network Device Setup >Inte[ _ WiDi / wireless
display Setup and press the OK button.
3
Press the A/Y (arrow) buttons to select Device List and press the
OK button.
Device List wilt appear.
The registered device can be deleted one by one by pressing the RED
button in the list.
When doing so, the following text can be seen "Do you want to
unregister
this device? Yes/No". Select Yes.
Advertisement
Table of Contents
