Adjustingthe Picturequality - Toshiba 65L9400U User Manual

1 08 Picture and Sound Controls
Adjusting the picture
NOTE o:o PCmodeis available for HDMI ® andPCinputsonly(notdisplayed for
otherinputsources).
•_. GameModeis notavailable in ANT/CABLE input.
1 Press the MENU button.
2 Select Picture > Picture Mode and press the OK button.
3 Press the &/Y (arrow) buttons to select a mode.
4 Press the EXIT button.
•_o The picture mode can also be changed by pressing the PIC MODE
button on the remote control.
NO'rN Thepicturemodeyouselectaffectsthecurrent i nputonly.Youcanselecta
differentpicturemodefor eachinput.
Adjustingthe picturequality
The adjustments you make to picture quality under a picture mode are
saved to that picture mode.
&'election Press (4) Press (t_)
Backlight* Darker Lighter
Contrast Lower Higher
Brightness Darker Lighter
Color Paler Deeper
Tint Reddish Greenish
Sharpness Softer Sharper
*Backtight: Adjusts the brightness of the entire screen. When in video mode and
no signal is input, this selection is set to 0. (Settings are stored in memory.)
To adjust the picture quality:
1 Press the MENU button.
2 Select Picture and press the OK button.
3 Press the &/Y (arrow) buttons to select the setting you would
like to adjust (Backlight, Contrast, Brightness, Color, Tint, or
Sharpness).
4 Press the _ (arrow) button.
5 Press the 4/_ (arrow) buttons to adjust the setting.
6 Press the EXIT button.