Connecting A Digitalaudiosystem - Toshiba 65L9400U User Manual

8
ConnectingYourTV
(_mnecting a digital audio syste
Connecting a digitalaudiosystem
The TV's Digital Audio Out terminal outputs a Dolby :_Digital, DTS '_or
2-channel down-mixed PCM (pulse-code modulation) signal for using
with an external Dolby :_Digital and/or DTS _'decoder, or other external
audio systems with optical audio input.
You will need an Optical audio cable. (Use an optical audio cable that
has the larger "TosLink TM'' c onnector and not the smaller "mini-optical"
connector.)
TV back panel
_ Digital aedlosyslem ]_
pllcal aMIo ¢able_ ,,,,,,,,,_'
(Sample Illustration) L 9400U Series--Connecting a digital audio
system
TV back panel
_ Digital audlosyslem 1_-]
ptlcal audio cable_ _=_f"
(Sample Illustration) L8400U Series--Connecting a digital audio
system
Before controlling the audio, see "Selecting the optical audio output
format" on page 121.
NOTE Someaudiosystems maynotbecompatible with Dolby ®Digitalor DTS _>
bitstream signals.Olderaudiosystems thatare notcompatible with
standard opticalout signalsmaynotwork properly, c reating a highnoise
level t hat maydamage speakers or headphones. THISDAMAGE IS NOT
COVERED B YYOUR WARRANTY. TheDIGITAL AUDIO OUTterminalmay
notoutputsomedigitalaudiosources because of copyrestrictions.
¢ TheDolby ®Digitalor DTS _> formatis available in thefollowing
situations:
- Whentunedto a digitalRFchannel
- Whenan HDMI ® inputis used
- Whennetworkdevices areused