Table of Contents
Advertisement
Advancedfeatures
1 4 1
Using the Flip Bar feature
3
Press the A/Y (arrow) buttons to select Flip Bar Wizard.
The setup screen appears.
4
Select Next and press the OK button.
5
Read the information on screen, and select Agree after confirming
the contents. Then select Next and press the OK button.
6
To set Favorite Channels, select Yes and press the OK button.
7
Register a channel.
o:o Up to 10 channels can be set forAntenna/Cabte
and external
input devices.
To register an Antenna/Cable
channel:
1
Press the A/Y
(arrow) buttons to select a channel.
2
Press the OK button and the channel marked with J will be
set in Favorite Channels.
To register a channel received through an external input device:
1
Press the 4/_" (arrow) buttons to change the input.
•:.
If some channels are already registered, press the Y
(arrow) button to move the focus to the empty space at
the bottom.
2
Press the YELLOW button.
3
Use the number buttons (0-9) to enter the Channel number to
registec then press the OK button.
4
When the focus has moved to the Channel Name, press the
OK button.
5
When the software keyboard appears, enter the Channel
Name.
For how to use the software keyboard, refer to "Using the
software keyboard" on page 135.
o:o To change registered channels, refer to "Changing the Favorite
Channel contents" on page 143.
8
When you have finished setting channels, press the GREEN button.
The current time screen appears.
9
Select Next and press the OK button.
If you are not connected to a network, select a channel to obtain
time information and press the ON button.
10 Select Done and press the OK button.
The Flip Bar setup is complete.
Advertisement
Table of Contents
