Table of Contents
Advertisement
Connecting to Power (cont'd)
Do not connect the receiver directly to the vehicle's battery
without following these additional steps:
• Install a protective fuse (6 amps) within 18" of the battery.
• Install a relay, switched from the ignition, between the battery and
the receiver.
• Use fire-resistant AWG 8 wire from the relay to the battery.
Ground
Pillar Ground Screw
Effective April 2004
Subject to change without notice
54-0239
TracVision A5 Receiver
VHF
ANTENNA IN
VEHICLE POWER
(10-16 VDC)
RF REMOTE
OUT TO TV
SATELLITE IN
INPUT
COMPOSITE VIDEO
Fuse
(6 Amp)
Supplied Cable
Switched
Relay
Ground
AWG 8
Wire
Fuse
(6 Amp)
+12 VDC
+
–
Vehicle
Battery
TracVision A5 Shop Manual
TO KVH
TO IRD
DIAGNOSTIC PORT 1
DIAGNOSTIC PORT 2
ANTENNA
SATELLITE IN
VIDEO
AUDIO R
AUDIO L
S-VIDEO
Ignition
Ground
TO VIDEO
Ground
© 2004 KVH Industries, Inc., All rights reserved.
Advertisement
Table of Contents
