Proper Operation - KVH Industries KVH TracVision Shop Manual

Proper Operation

PLEASE NOTE!
If the TracVision system was left on when the vehicle was last turned
off, TracVision will automatically turn on when you start up the
vehicle. DO NOT DO ANYTHING! Wait 30-60 seconds for the
Program Guide to load and you are ready to watch TV – if the
Program Guide doesn't load, check for blockage as noted in step 7.
1. Turn on the car.
2. Ensure that the receiver's power switch
is turned on. The light should be lit.
(The receiver beeps twice.)
3. Turn on the video screen and select the A5 receiver input (not the
DVD/VCR input) .
4. Do not move the vehicle for 20 seconds.
5. If the TracVision system was left on when the vehicle was last
turned off, Message 1 then Message 2 will appear on the screen.
Message 1
If your satellite dish is ready for DIRECTV
service, please wait until your
Advanced Program Guide
Searching for satellite signal...
Effective April 2004
Subject to change without notice
54-0239
®
™ is prepared.
Installation
TracVision A5 Shop Manual
Message 2
If your satellite dish is ready for DIRECTV
service, please wait until your
Advanced Program Guide
then
Acquiring guide data...
CONTINUED ON NEXT PAGE...
®
™ is prepared.
Installation
© 2004 KVH Industries, Inc., All rights reserved.