MAINTENANCE WORK ON CHASSIS AND ENGINE
Removing the seat
Mounting the seat
Insert the ignition key in the seat lock
Lift up the seat at the rear, pull it back and remove from above.
100108-10
Suspend the seat on the screw
it forwards. The two projections
Push the locking pin
the locking pin locks in place with an audible click.
Remove the ignition key from the seat lock.
Finally, check that the seat is correctly mounted.
400155-01
and turn it 45° counterclockwise.
, press the rear downwards and at the same time push
must be inserted into the frame.
into the lock housing and push the back of the seat down until
89