Braking - KTM Supermoto 690 Owner's Manual

RIDING INSTRUCTIONS

Braking

Warning
Danger of accidents If you brake too hard, the wheels can lock.
Adapt your braking to the traffic situation and the road conditions.
Warning
Danger of accidents Reduced braking due to wet or dirty brakes.
Clean or dry dirty or wet brakes by riding and braking gently.
Warning
Danger of accidents Reduced braking caused by spongy pressure point of front or rear brake.
Have the brake system checked in an authorized KTM workshop, and do not ride any further.
Warning
Danger of accidents Brake system failure.
If the foot brake pedal is not released, the brake linings drag permanently. The rear brake can fail due to overheating. Take your
foot off the foot brake pedal if you do not want to brake.
For example, if the engine stalls at a junction, just pull the clutch and press the electric
starter button. You do not need to shift into neutral.
Switch off the engine if you expect to be standing for a long time.
If the FI warning lamp (MIL) starts to light up during the journey, stop immediately. If
you shift to neutral, the FI warning lamp (MIL) begins to flash.
Info
From the flash rhythm, you can deduce a two-digit number, the so-called flash
code. The flash code tells you which component is affected by a fault.
48