Fitting Front Wheel - KTM Supermoto 690 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE
x

Fitting front wheel

Loosed screw
Screw out screw
dle out of the fork stub. Remove screw
Warning
Danger of accidents Reduced braking due to damaged brake discs.
Always lay the wheel down in such a way that the brake disc is not damaged.
Holding the front wheel, withdraw the wheel spindle. Take the front wheel out of the
100141-10 fork.
Warning
Danger of accidents Reduced braking due to oil or grease on the brake discs.
Always keep the brake discs free of oil and grease, and clean them with
brake cleaner when necessary.
Check parts for damage and wear. Replace damaged or worn parts.
Clean and grease the thread of the wheel spindle and screw
Long-life grease (
100142-10
Lift the front wheel into the fork, position it, and insert the wheel spindle. Mount and
tighten screw
Specification
Screw, front wheel spindle
Position the brake caliper and check that the brake linings are seated correctly.
and screw .
about 6 turns, press your hand on the screw to push the wheel spin-
.
P. 155)
.
.
M24x1.5 40 Nm (29.5 lbf ft)
81