MAINTENANCE WORK ON CHASSIS AND ENGINE
Fitting front wheel
x
9.41
Warning
Danger of accidents Reduced braking due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Clean and grease shaft seal rings
Long-life grease (
–
Fit the spacing sleeves.
100265-10
–
Lift the front wheel into the fork, position it, and insert the wheel spindle.
–
Mount and tighten screw
Guideline
Screw, front wheel spindle
–
Operate the hand brake lever several times until the brake pads are lying correctly on
the brake disc.
–
Remove the motorcycle from the work stand. (
–
Pull the front wheel brake and push down hard on the fork several times to align the
100266-10
fork legs.
and bearing surface
S. 177)
.
M24x1.5
S. 63)
101
of the spacing sleeves.
40 Nm (29.5 lbf ft)