Applying Eq To The Master Bus (Master - Korg D3200 Owner's Manual

Applying EQ to the master bus (Master EQ)
(1) Press the EQ key to access the "MasterEQ" tab page.
(2) Link the channels to share settings.
For this example, click the Link button to turn it on (highlighted).
When the Link button is on, adjusting either side (left or right channel) will
make the same settings for both channels (→p.46).
(3) Make sure that the L button is on (highlighted); the display will show the
left channel master EQ screen.
(4) Press the PLAY key.
(5) Adjust the master EQ as the song plays.
While listening to the output of the master bus or headphones, adjust the
master EQ parameters using the Knob Matrix.
The EQ window displays the EQ curve. You can switch the master EQ on/off
by clicking the ON/OFF button in the LCD screen.
If you want to make independent settings for the left and right master EQ, turn off the Link
button and use the R or L button to select right or left.
(6) When you're done adjusting the master EQ, press the STOP key.
32
(5)
(1)
(6) (4)
EQ window
(3)
(2)
(1)
(5)