Korg D3200 Owner's Manual page 26

Send and equalizer
When you're in a tab page where you can edit parameters, or if you've
pressed the SEND key or EQ key to access the tab page, you can use the
Knob Matrix to edit the parameters or values.
Editing effects
When the effect parameter knobs are shown in the LCD screen, or if you've
pressed the EFFECT key to access the tab page, you can use the Knob Matrix
to select parameters or edit their value.
Selecting a channel
If the CH SELECT key is lit, you can press the channel key of the desired
channel to directly select it for editing.
Switching between channels 1–16 and 17–32
In the case of parameters for which the LCD screen cannot display all 32 chan-
nels at once, sixteen channels will be displayed at a time, depending on
whether the 1–16 key or 17–32 key is lit.
4. Panel key combination shortcuts
By pressing two of the panel keys simultaneously, you can use various short-
cuts such as moving between pages, switching functions, or changing the
location.
Some examples of shortcuts
• Hold down the SONG key and press the + key or – key to increment/
decrement the song number.
• Hold down the MIXER key and press the LOC 1, 2, 3, or 4 key to recall
the memory page.
• Hold down the MIXER key and press the π key or √ key to increment
the MIXER page.
• Hold down the MIXER key and press the † key or ® key to decrement
the MIXER page.
• Hold down the π key and press the SYSTEM/MIDI key to display the
calendar dialog box.
• Hold down the π key and press the SESSION DRUMS key to switch
the TimeDispType.
• Hold down the SYSTEM/MIDI key and press the ENTER key to enter
USB mode.
There are many other shortcuts in addition to those listed above. Refer to the
list of shortcuts (→p.178).
16