Intermec PD41 Manual page 76

PD41 and PD42 Commercial Printer User's Manual
5 Copy the firmware binary upgrade file to the upgrade folder on
the USB storage device.
Note: The printer supports 8.3 binary filenames, which means the
filename can have up to eight characters and a .bin extension.
6 Insert the USB storage device in the appropriate slot on the back
of your printer. The upgrade starts. On the display screen, the
status message, "Time Out," appears.
7 When the upgrade is complete, the status message, "Check
Integrity," appears. Remove the USB storage device. You may need
to restart your printer.
To upgrade using an Ethernet or 802.11 network connection
1 Start your web browser application.
2 In the address field, enter the IP address of your printer.
3 Press Enter. The home page of your printer appears.
4 From the menu at the top of the page, click Maintenance. The
firmware upgrade screen appears.
To upgrade using a serial or USB connection
• Use Fingerprint or IPL commands to send the upgrade file to your
printer.
For help, see the Intermec Fingerprint Command Reference Manual
the IPL Command Reference
Chapter 3 — Configuring the Printer
Manual.
or
61