Operator Panel; Removal - IBM RS/6000 Enterprise Server M80 Service Manual
Hide thumbs
Also See for RS/6000 Enterprise Server M80:
- User manual (296 pages) ,
- Installation manual (94 pages) ,
- Installation manual (76 pages)
Table of Contents
Advertisement
Operator Panel
Removal
1. Turn off power as described in "Powering Off the System" on page 415.
2. Place the I/O drawer in the front service position as described in "Front Service Position" on page 464.
3. Loosen the two retaining screws that attach the front bezel to the drawer.
4. Grasp both sides of the front bezel and pull it off the drawer.
5. Place the drawer in the front service position as described in "Front Service Position" on page 464.
6. Remove the two screws (1) from the top of the operator panel.
1
R
7. Pull out the operator panel.
8. Disconnect the cables from the operator panel.
461
Chapter 10. Removal and Replacement Procedures
Advertisement
Table of Contents
