Primary I/O Drawer Operator Panel - IBM RS/6000 Enterprise Server M80 Service Manual

Location Code
U1.1-P1-M1.5 x8
U1.1-P1-M1.6 x4
U1.1-P1-M1.7 x4
U1.1-P1-M1.7 x8
U1.1-P1-M1.8 x4
U1.1-P1-M2.n
U1.1-P1-M2.1 x4
U1.1-P1-M2.1 x8
U1.1-P1-M2.1 x32
U1.1-P1-M2.2 x4
U1.1-P1-M2.3 x4
U1.1-P1-M2.3 x8
U1.1-P1-M2.4 x4
U1.1-P1-M2.5 x4
U1.1-P1-M2.5 x8
U1.1-P1-M2.6 x4
U1.1-P1-M2.7 x4
U1.1-P1-M2.7 x8
U1.1-P1-M2.8 x4
For physical locations, see "Memory Riser Card and Memory DIMM Locations" on page 19.

Primary I/O Drawer Operator Panel

9
1 Power on/off button
3 Operator panel display
5 Serial number plate
7 Reset button
9 Disturbance or system attention LED
Note: You must activate the service processor reset button very carefully. An insulated paper clip is
recommended. Unbend the clip so that it has a straight section about two inches long. Insert the
clip straight into the hole, keeping the clip perpendicular to the plastic bezel. When you engage the
20
Service Guide
1
2
!
R
8
7
6
Memory DIMMs
Memory Octal C (DIMMs 5, 6, 13, 14, 21, 22, 29, 30)
Memory Quad C Even (DIMMs 6, 14, 22, 30)
Memory Quad D Odd (DIMMs 7, 15, 23, 31)
Memory Octal D (DIMMs 7, 8, 15, 16, 23, 24, 31, 32)
Memory Quad D Even (DIMMs 8, 16, 24, 32)
Individual Memory DIMMs on Riser Card 2 (n denotes
DIMM number)
Memory Quad A Odd (DIMMs 1, 9, 17, 25)
Memory Octal A (DIMMs 1, 2, 9, 10, 17, 18, 25, 26)
All Memory DIMMs on Riser Card 2
Memory Quad A Even (DIMMs 2, 10, 18, 26)
Memory Quad B Odd (DIMMs 3, 11, 19, 27)
Memory Octal B (DIMMs 3, 4, 11, 12, 19, 20, 27, 28)
Memory Quad B Even (DIMMs 4, 12, 20, 28)
Memory Quad C Odd (DIMMs 5, 13, 21, 29)
Memory Octal C (DIMMs 5, 6, 13, 14, 21, 22, 29, 30)
Memory Quad C Even (DIMMs 6, 14, 22, 30)
Memory Quad D Odd (DIMMs 7, 15, 23, 31)
Memory Octal D (DIMMs 7, 8, 15, 16, 23, 24, 31, 32)
Memory Quad D Even (DIMMs 8, 16, 24, 32)
3
5
2 Power on/off LED
4 Speaker
6 Reset icon
8 Service use only
4