Diskette Drive; Removal; Replacement - IBM RS/6000 Enterprise Server M80 Service Manual
Hide thumbs
Also See for RS/6000 Enterprise Server M80:
- User manual (296 pages) ,
- Installation manual (94 pages) ,
- User manual (190 pages)
Table of Contents
Advertisement
Diskette Drive
Removal
1. Turn off power as described in "Powering Off the System" on page 415.
2. If you have not already done so, open the front door of the rack unit.
3. Loosen the two thumbscrews that attach the front bezel to the I/O drawer.
4. Grasp both sides of the front bezel and pull it off the drawer.
5. Pull out on the snap button and pull the diskette drive out.
Snap Botton
R
6. Disconnect the cables from the diskette drive.
7. Remove the screws that connect the carrier to the diskette drive.
Replacement
Replace in reverse order.
460
Service Guide
Advertisement
Table of Contents
