Manipulating The Map - Clarion NXS09 Owner's Manual & Installation Manual

. The address, the coordinate and the list of nearby POls will be
.~~.~
2. For further details, tap
ig~
to open the Position menu.
Info
3. Tap
displayed.
• You can check the details of any other location by selecting it on the map:
1. Tap the map anywhere to open the map control buttons.
2. Tap the desired location on the map. The Cursor
(c:»
appears there. The address of
the location is displayed at the bottom of the map.
3. For further details, tap to open the Cursor menu.
button.
•
Info
. The address, the coordinate and the list of nearby POls will be
Info
automatically. You only need to tap the
4. Tap
displayed.
• It is even easier if you select the desired . t' th Fnd menu. Then the Cursor menu opens
2.3.2 Manipulating the map
Position markers on the map:
• Current GPS position:
il
(page 20)
• Selected location (Cursor):
c:>
(page 21)
The following controls help you modify the map view to suit your actual needs the best. Most of these
controls appear only if you tap the map once, and disappear after a few seconds of inactivity.
Action Button(s) Description
Moving the map No buttons
You can move the map into any direction. Tap the map
at any desired location. The point you hit on the map
moves to the center of the screen.
If GPS position is available and you have moved the
;l}~
map, the
;l\;::;.j;
button appears. Tap this button to
return to the GPS position.
Opening/closing map
control buttons
Tap this button to show or hide the following map
control buttons:
• Zoom in/out
• Rotate left/right (3D map only)
• Tilt up/down (3D map only)
• Zoom preset buttons (2D map only)
NX509
13