Table of Contents
Advertisement
The USB device is
Disconnect the USB device and reconnect. If the
damaged.
device is still not recognized, try replacing with a
I-C-o-n-n-e-c-to-rs-a-re-l-o-os-e-.---1 different USB device.
USB Devices
USB device is not
recognized.
The USB device has been
inserted with wrong
direction.
The USB connector is
broken.
Reversing the connection direction of the USB
device, try it again.
Replace with a new USB device.
No sound heard with
No MP3IWMAJAAC file is
Store these files properly in the USB device.
the display "No File"
stored in the USB device.
shown.
Sound skips or is
noisy.
The iPod's video
image is disturbed.
MP3IWMAJAAC files are
not encoded properly.
The TV Signal setting of
the iPod is not set correctly.
Use MP3IWMAJAAC files encoded properly.
Set the TV Signal setting (NTSC/PAL) of the iPod
correctly.
9. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
DVDPlayer
Error 2
Error 3
Error 6
Parental Violation
Wrong Region
A disc is caught inside the
DVD player and is not
ejected.
A disc cannot be played
due to scratches, etc.
A disc is loaded upside-
down inside the DVD
player and does not play.
No MP3IWMAlAAC/DivX
file is recorded on the disc.
Parental level error
Region code error
This is a failure of DVD player's mechanism.
Consult your store of purchase.
Replace with a non-scratched, non-warped disc.
Eject the disc then reload it properly.
Write these files properly onto a disc.
Set the correct Parental level.
Eject the disc, and replace correct region code
disc.
DRM
WMA files protected by
Perform the operation such as skipping a file.
DRM are played.
(Repeat and random playback mode may be
..... N -o-t-S-u-p-p-o-rt----+-F-i1e-S-no-t-s-u-p-po-rt-e-d-b-y-th-is--l canceled.)
unit are played.
54
NX509
Advertisement
Chapters
Table of Contents
