Manipulating The Map - Clarion NX604 Quick Start Manual

2.3.4 Manipulating the map

Tap the map anywhere to browse it during navigation. The map stops following the current position (the
Vehimarker, a blue arrow by default, is not locked in a fix position on the screen any more) and control
buttons appear to help you modify the map view.
Action Button(s)
Moving the No buttons
map with
drag&drop
Zooming in
and out
Tilting up and
down
Rotating left
and right
2D or 3D view
Compass in
2D map view
mode
Compass in
3D map view
mode
20 NX604 English
You can move the map in any direction: tap and hold the map, and
move your finger towards the direction you want to move the map.
Changes how much of the map is displayed on the screen.
Clarion Mobile Map uses high-quality vector maps that let you
,
examine the map at various zoom levels, always with optimized
content. It always displays street names and other text with the
same font size, never upside-down, and you only see the streets
and objects that you need.
Map scaling has a limit in 3D map view mode. If you zoom out
further, the map switches to 2D view mode.
Tap the button once to modify the view in large steps, or tap and
hold the button to modify it continuously and smoothly.
Changes the vertical view angle of the map in 3D mode.
,
Tap the button once to modify the view in large steps, or tap and
hold the button to modify it continuously and smoothly.
Changes the horizontal view angle of the map.
, Tap the button once to modify the view in large steps, or tap and
hold the button to modify it continuously and smoothly.
Tap this button to switch between the 3D perspective and 2D top-
down map view modes.
,
The direction of the compass shows North. Tap the button to switch
to North-up view, and then tap again to rotate the map in the
,
previous direction.
The direction of the compass shows North. Tap the button to switch
to North-up view, and then tap again to rotate the map in the
,
previous direction.
Description