Using The Cursor (The Selected Map Location) - Clarion NXS09 Owner's Manual & Installation Manual

The following information can be seen in the three data fields shown on the map screen. Tap this area
to open the Trip Information screen where you can select which values to be shown in these three
fields.
When there is no active route, these fields show the following information: current speed, compass
and the current time of day.
Icon
Type More information
firW
Compass
Shows the direction of your heading both when the
map is automatically rotated (3D) and when the map is
always facing North (2D).
•
Speed information
There are speed values that can be shown:
• Current speed
•
Speed limit on the current road
..
Time information
There are time values that can be shown:
•
Current GPS time
•
Time remaining to reach the destination
•
Time remaining to reach the next via point
•
Estimated arrival time at the destination
•
Estimated arrival time at the next via point
•
Distance information
There are distance type values that can be shown:
•
Distance remaining to reach the destination
•
Distance remaining to reach the next via point
•
Current altitude
The next area is a combined status indicator field. Tap this area to open the Quick menu (page 57).
Icon
Status for
GPS position quality
Vehicle type
More information
A higher number of lit bars indicates better GPS
position accuracy.
The symbol displays the vehicle type used for route
calculation.
2.3.5 Using the Cursor (the selected map location)
First, place the Cursor at the desired map location with one of the following options:
• Use the Find menu to select a location. The map returns with the selected point (the Cursor) in
the middle, and the Cursor menu appears with the available options.
18
• Tap the screen to place the Cursor at the desired location. Now tap
menu.
You can perform the following actions in Simple mode:
NX509
to open the Cursor