Clarion NXS09 Owner's Manual & Installation Manual page 116

Symbol
Blue line
Name
Rotate left, rotate right
Tilt up, tilt down
Zoom in, zoom out
Return to GPS position
(appears when GPS position is
available and you have moved
the map)
Enable Smart Zoom (replaces
the previous button if there is no
GPS position or the map has
not been moved)
Zoom preset buttons (available
in Advanced mode only)
Tilt preset buttons (available in
Advanced mode only)
Current GPS position (on
nearest road)
Cursor (selected map location)
Lane information
Signpost information
Active route
Map scale (20 map only)
Action
Rotates the 3D map left or right
Tilts the 3D map
Scales the map
Tap this button to move the map back
to the current GPS position. If the map
has been rotated, automatic map
rotation is also re-enabled.
Tap this button once to enable Smart
Zoom.
Tap&hold the button to set the zoom
limits of Smart Zoom.
Tap one of the preset buttons to set
the zoom level to a fix, predefined
value. Smart Zoom is disabled. These
buttons are available in 20 mode.
Tap&hold any of the buttons to set its
value to the current zoom level, or to
reset it to its original value.
Tap one of the preset buttons to set
the tilt and zoom levels to fix,
predefined values. Smart Zoom is
disabled. These buttons are available
in 3D mode.
Tap&hold any of the buttons to set its
value to the current tilt and zoom
levels, or to reset it to its original
value.
n/a
n/a
n/a
n/a
n/a
n/a
NX509
47