Gps Data Screen - Clarion NXS09 Owner's Manual & Installation Manual

Main function (single tap) Function (tap and hold)
3D buildings can be displayed on the map. Use this Opens 3D Settings.
switch to suppress them temporarily.
Switches between the daytime, and night color Opens Color Profiles settings.
schemes manually. This will not disable the
automatic switching between the two schemes: the
other color scheme returns later.
Opens Route Planning
options.
Tap this button and select the Vehicle type to be
used for route calculation. Otherwise it is selected
in Route Planning options in Settings (page 68).
Changing the Vehicle type triggers an automatic
route recalculation.
Button
Turns track log recording on or off otherwise Opens Manage Track Logs.
controlled on the Manage Track Logs screen.
Opens the GPS Data screen with satellite n/a
information, data coming from the GPS receiver,
and a shortcut to the GPS Settings screen if
needed (GPS receiver detection is automatic).
4.1.9 GPS Data screen
Tap the following buttons: , and then
and to see the status of GPS reception.
to open the GPS Data screen
Icon Color
Name
Description
--
Green GPS position quality
Clarion Mobile Map has a connection
indicator
to the GPS receiver and GPS position
information is available in 3D: Clarion
Mobile Map can calculate both your
horizontal and vertical GPS position.
l1li
Yellow
Clarion Mobile Map has a connection
to the GPS receiver and GPS position
information is available in 20: only the
horizontal position is calculated,
Clarion Mobile Map cannot calculate
your vertical GPS position.
--
Gray
Clarion Mobile Map has a connection
to the GPS receiver but GPS position
information is not available.
--
Red
Clarion Mobile Map has no connection
to the GPS receiver.
Since the device has a built-in GPS
58
NX509