Entering An Address Ifhouse Numbering Is Restarted - Clarion NXS09 Owner's Manual & Installation Manual

• After entering a couple of characters, the names that match the string
appear in a list.
Done
• Tap to open the list of results before it appears
automatically.
4. Select the city from the list.
4. Enter the street name:
1. Tap
2. Start entering the street name on the keyboard.
3. Get to the list of results:
• After entering a couple of characters, the names that match the string appear in a
list.
Done
• Tap to open the list of results before it appears automatically.
4. Select the street from the list.
5. Enter the house number:
1. Tap
2.
Numbers
Enter the house number on the keyboard. (To enter letters, tiliiiiiiiiii
select an alphabetic keyboard layout. To enter symbols, tap _ ) .
Done
and
3. Tap to finish entering the address.
6.
(Simple
mode) or (Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
3.1.2.2 Entering an address if house numbering is restarted
There are long roads where house numbering is restarted at some point. This way the same house
number can appear twice or even more times on the same road. If this is the case, after entering the
house number, you need to select the appropriate address by the district/suburb information.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons: (Simple mode), or (Advanced mode).
2. By default, Clarion Mobile Map proposes the country/state and city where you are. If needed,
tap the button with the name of the country/state, and select a different one from the list.
3. If needed, change the city:
30
NX509
• To select the city from the list of recently used ones, tap the button.