Network Menu - Konica Minolta magicolor 2530 DL User Manual

ENGINE
SERVICE

Network Menu

If the printer is connected to a network, the following settings should be spec-
ified. For details about each setting, contact your network administrator.
! "
All factory default values are shown in bold.
DHCP
BOOTP
IP
ADDRESS
SUBNET
MASK
Configuration Menu Overview
RESTORE Resets the
USER CONTINUE
to the factory defaults. In addition, the
DEFAULT
PageScope Web Connection administrator
password is reset to the default password.
For details of the PageScope Web
Connection administrator password, refer to
the magicolor 2530 DL Reference Guide.
Settings
DHCP SET:ON
BOOTP SET:OFF
DHCP SET:OFF
BOOTP SET:ON
DHCP SET:OFF
BOOTP SET:OFF
If there is a DHCP server on the network, specify whether the
IP address is automatically assigned by the DHCP server and
other network information is loaded.
Specifies whether the IP address is automatically assigned by
BOOTP and other network information is loaded.
Setting
192.168.1.2
Sets the IP address of this printer on the network. Use the Up,
Down, Left, and Right keys to enter the value.
When manually setting the IP address, first set DHCP and
BOOTP to OFF .
Setting
255.255.255.0
Sets the subnet mask value of the network. Use the Up,
Down, Left, and Right keys to enter the value. When manually
setting the Subnet Mask, first set DHCP and BOOTP to
ENERGY SAVER
and TRAY CHAINING
, AUTO
menus
OFF
.
31