Thick Stock - Konica Minolta magicolor 2530 DL User Manual

! "
Keep media between 35% and 85% relative humidity. Toner does
not adhere well to moist or wet paper.
#
Layered
#
Adhesive
#
Folded, creased, curled, embossed, warped, or wrinkled
#
Perforated, three-hole punched, or torn
#
Too slick, too coarse, or too textured
#
Different in texture (roughness) on the front and back
#
Too thin or too thick
#
Stuck together with static electricity
#
Composed of foil or gilt; too luminous
#
Heat sensitive or cannot withstand the fusing temperature (180°C
[356°F])
#
Irregularly shaped (not rectangular or not cut at right angles)
#
Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
#
Acidic
#
Any other media that is not approved

Thick Stock

Paper thicker than 90 g/m
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
Capacity
Orientation Face up
Driver
Media Type
Weight
Duplexing
! "
43 lb bond is also referred to as 90 lb index stock.
DO NOT use thick stock that is
#
Mixed with any other media in the trays (as this will cause printer misfeed-
ing)
Media Types
2
(24 lb bond) is referred to as thick stock. Test all
Tray 1 Up to 50 thick stock sheets, depending on
their thickness
Tray 2 Not supported
Thick stock (91 to 163 g/m
91 to 163 g/m² (25 to 43 lb)
Not supported
2
)
45