Konica Minolta magicolor 2530 DL User Manual page 130

This message...
MEDIA JAM
DUPLEX LOWER
MEDIA JAM
DUPLEX UPPER
MEDIA JAM
FUSER
MEDIA JAM
TRANSFER ROLLER
MEDIA JAM
TRAY X
PUT MEDIA : TRAY 1
"MEDIA"
PUT MEDIA : TRAY X
"SIZE"
SIZE/TYPE ERROR
SIZE/TYPE ERROR
DUPLEX
TONER LIFE END
X
122
means...
Media has misfed in
the duplex option.
Media has misfed in
the duplex option.
Media has misfed in
the transfer roller
area. This type of
misfeed means that
the media did not
make it to the paper
exit area.
Media has misfed
while being pulled
from the specified
tray (X).
The media type set in
the printer driver is
different from the type
of media loaded into
Tray 1.
The media size set in
the printer driver is
different from the size
of media loaded.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
Media not compatible
with duplex printing.
The X toner cartridge
is empty.
(Appears when
ENGINE/TONER
EMPTY STOP is set)
Status, Error, and Service Messages
do this...
Locate and remove the
misfeed.
Load the correct media
type into Tray 1.
Load the correct media
size into the specified
tray.
Load the correct media
size and type.
Use the correct media
size and type when
duplexing.
Replace the toner car-
tridge.