Dual In-Line Memory Module (Dimm) - Konica Minolta magicolor 2530 DL User Manual

Dual In-Line Memory Module (DIMM)

A dual in-line memory module (or DIMM) is a compact circuit board with sur-
face-mount memory chips.
Your printer comes with 64 MB SDRAM printer memory on board. However,
you can upgrade to a maximum of 576 MB of RAM through the installation
of an additional unbuffered SDRAM DIMM. Your printer comes with one free
DIMM slot.
DIMM's Specifications
Capacity
Module Type
Pin Count
Configuration
Data Rate
CAS Latency
Voltage
! "
Your printer recognizes only single-sided DIMMs. If you install a dou-
ble-sided DIMMs, the printer may recognize only half of the memory
available on that DIMMs.
Recommended DIMMs
1) 128 MB DIMM - CT16M64S4D7E(Crucial)
2) 256 MB DIMM - VS133-S256/HB(Buffalo)
3) 512 MB DIMM - 0286-0005(Centon)
! "
For details on the available DIMMs, refer to printer.konicaminolta.com.
Dual In-Line Memory Module (DIMM)
128 MB, 256 MB, 512 MB
unbuffered NonECC
168-pin
16M x 64bit, 32M x 64bit, 64M x 64bit
100 MHz, 133 MHz
3
3.3 V
127