Working With The Printer Status Monitor Center; Introduction; System Requirements; Opening The Printer Status Monitor Center And Showing The Supplies Status - Konica Minolta magicolor 2530 DL User Manual

Working With the Printer Status Monitor
Center

Introduction

Printer Status Monitor Center is an application that shows the status of multi-
ple printing devices connected to the host through local ports (USB) or net-
work ports. Printer Status Monitor Center locates network printing devices by
using the Service Location Protocol (SLP), and only supports printing devices
responding to KONICA MINOLTA–specific SLP and PJL queries such as the
magicolor 2300 DL, the magicolor 2430 DL, the magicolor 5430 DL, the mag-
icolor 5440 DL and the magicolor 2530 DL.
! "
If a KONICA MINOLTA product is not compatible with both SLP and
KONICA MINOLTA–specific PJL, Printer Status Monitor Center cannot
be used.
! "
The Printer Status Monitor Center requires that Enable Bidirectional
Support be selected in Printing Properties.

System Requirements

#
Operating System
Windows XP/Server 2003/2000/Me/98SE/NT 4.0
#
Printer Ports Supported by Printer Status Monitor Center
–
Ethernet port
–
USB port
Opening the Printer Status Monitor Center and Showing
the Supplies Status
Follow the appropriate operation described below to open the Printer Status
Monitor Center.
#
Windows XP/Server 2003—From the start menu, choose All Programs,
KONICA MINOLTA, magicolor 2530DL, and then Printer Status Moni-
tor Center.
#
Windows 2000/Me/98SE/NT 4.0—From the Start menu, choose Pro-
grams, KONICA MINOLTA, magicolor 2530DL, and then Printer Status
Monitor Center.
18

Working With the Printer Status Monitor Center