Konica Minolta magicolor 2530 DL User Manual page 38

TRAY CHAINING
ENGINE
SERVICE
30
Settings
When set to
switches to a different tray containing media
of the same size and type, if the specified tray
runs out of media.
When set to
displays a message indicating that media
should be loaded into the specified tray if the
specified tray runs out of media.
Use this submenu to view information related to the engine.
The number of page faces that have been
TOTAL FACE
printed to date.
COUNT
The number of color page faces that have
COLOR FACE
been printed to date.
COUNT
The number of monochrome page faces that
BW FACE
have been printed to date.
COUNT
The current controller firmware version.
CONTROL-
LER VER.
The printer engine firmware version.
ENGINE
VER.
Performs color calibrations in order to adjust
COLOR
the color shift.
CALIBRA-
TION
All toner cartridges can be removed.
REMOVE
ALL TONER
First, the cyan (C) toner cartridge is rotated,
so that it can be removed. After it is removed
and all covers are closed, the black (K) toner
cartridge is rotated, so that it can be removed.
In the same way, the yellow (Y) and magenta
(M) toner cartridges are rotated one by one,
so that they can be removed.
Settings
ENERGY
SAVER
When set to
When set to
and the
not displayed.
This menu is displayed only on the model for
the Americas.
ON / OFF
ON , the printer automatically
OFF
, the printer stops and
ON / OFF
ON , Energy Saver is enabled.
OFF , Energy Saver is disabled
ENGINE/ENERGY SAVER
Configuration Menu Overview
menu is