Yamaha RX-Z11 Service Manual page 55

8. MANUAL TEST
The built-in noise generator of DSP outputs the test
noise through the channels specified by the sub-
menu.
The noise frequency for LFE is 30 to 80 Hz. Other
than that, the noise frequency is 500 to 2 kHz.
TEST ALL
8.MANUAL TEST
TEST ALL
Noise is output from all channels.
TEST FRONT R
8.MANUAL TEST
TEST FRNT R
Noise is output from the FRONT R channel.
TEST SURROUND BACK L
8.MANUAL TEST
TEST SB L
Noise is output from the SURROUNDBACK
L channel.
TEST FRONT PRESENCE R
8.MANUAL TEST
TEST FP R
Noise is output from the FRONT PRESENCE
R channel.
TEST LFE
8.MANUAL TEST
TEST LFE
Noise is output from the SUBWOOFER channel.
TEST FRONT L
8.MANUAL TEST
TEST FRNT L
Noise is output from the FRONT L channel.
TEST SURROUND R
8.MANUAL TEST
TEST SURR R
Noise is output from the SURROUND R channel.
TEST SURROUND L
8.MANUAL TEST
TEST SURR L
Noise is output from the SURROUND L channel.
TEST REAR PRESENCE L
8.MANUAL TEST
TEST RP L
Noise is output from the REAR PRESENCE
L channel.
RX-Z11/DSP-Z11
TEST CENTER
8.MANUAL TEST
TEST CENTER
Noise is output from the CENTER channel.
TEST SURROUND BACK R
8.MANUAL TEST
TEST SB R
Noise is output from the SURROUND BACK
R channel.
TEST FRONT PRESENCE L
8.MANUAL TEST
TEST FP L
Noise is output from the FRONT PRESENCE L
channel.
TEST REAR PRESENCE R
8.MANUAL TEST
TEST RP R
Noise is output from the REAR PRESENCE
R channel.
55