Yamaha RX-Z11 Service Manual page 46

RX-Z11/DSP-Z11
• Details of Self-Diagnostic Function menu
With full-bit output specified in some modes, it is possible
to execute 0dBFS output without head margin in each
channel.
1. DSP THROUGH
This function is for DSP2 only. Main DSP of DSP2 is
selected for FRONT output.
Using the sub-menu, it is possible to select 0dB output
level or full-bit output.
MARGIN
• The signal is output including the head margin.
INPUT: DVD ANALOG
SPEAKER OUT: 1kHz, SUBWOOFER OUTPUT: 50Hz
Input level Volume
Both ch, -20 dBm +6.5 dB
FULL BIT
• The signal is output in digital full bit without including
the head margin.
• The SWFR signal is output but not in digital full bit.
INPUT: DVD ANALOG
SPEAKER OUT: 1kHz, SUBWOOFER OUTPUT: 50Hz
Input level Volume
Both ch, -20 dBm +6.5 dB
PLL=OFF
• Output with PLL (NPGA) turned off.
INPUT: DVD ANALOG
SPEAKER OUT: 1kHz, SUBWOOFER OUTPUT: 50Hz
Input level Volume
Both ch, -20 dBm +6.5 dB
46
1.DSP THROUGH
MARGIN
FRONT CENTER SURROUND
+13.0 dBm +13.0 dBm +13.0 dBm
1.DSP THROUGH
FULL BIT
FRONT CENTER SURROUND
+13.0 dBm +13.0 dBm +13.0 dBm
1.DSP THROUGH
PLL=OFF
FRONT CENTER SURROUND
+13.0 dBm +13.0 dBm +13.0 dBm
SPEAKER OUT
SURROUND BACK L/R FRONT PRESENCE
+13.0 dBm +13.0 dBm
SPEAKER OUT
SURROUND BACK L/R FRONT PRESENCE
+13.0 dBm +13.0 dBm
SPEAKER OUT
SURROUND BACK L/R FRONT PRESENCE
+13.0 dBm +13.0 dBm
SUBWOOFER
OUTPUT
REAR PRESENCE
+13.0 dBm -∞
SUBWOOFER
OUTPUT
REAR PRESENCE
+13.0 dBm -∞
SUBWOOFER
OUTPUT
REAR PRESENCE
+13.0 dBm -∞