RX-Z11/DSP-Z11
13. Click [E.P.R...], and "Erase OK?" is displayed.
(Fig. 5)
Click [OK] to start writing. (Fig. 5)
14. When writing is completed, "Program Finished" is
displayed. (Fig. 5)
Click [OK]. (Fig. 5)
15. Disconnect the power cable of this unit from the
AC outlet.
16. End "FlashSta. exe."
17. Disconnect the RS232C cross cable, RS232C
conversion adapter and flexible flat cable.
Writing /
36
When click [E.P.R...], "Erase OK?" is displayed.
When click [OK], writing is started.
Collating /
Click [OK].
Writing completed /
Fig. 5