Cisco 220 Series Smart Plus Administration Manual page 88

Administration: Discovery
Configuring LLDP
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
Address Subtype
-
Management Address field, for example, IPv4.
Address
- —Returned address most appropriate for management use,
typically a Layer 3 address.
Interface Subtype
-
number.
Interface Number
-
address.
• MAC/PHY Details
Auto-Negotiation Supported
-
status.
Auto-Negotiation Enabled
-
Auto-Negotiation Advertised Capabilities
-
capabilities, for example, 1000BASE-T half duplex mode, 100BASE-TX
full duplex mode.
Operational MAU Type
-
performs physical layer functions, including digital data conversion from
the Ethernet interfaces' collision detection and bit injection into the
network, for example, 100BASE-TX full duplex mode.
• 802.3 Details
- 802.3 Maximum Frame Size
size.
• 802.3 Link Aggregation
Aggregation Capability
-
aggregated.
Aggregation Status
-
- Aggregation Port ID
• MED Details
Capabilities Supported
-
- Current Capabilities
Device Class
- —LLDP MED endpoint device class. The possible device
classes are:
—Type of management IP address that is listed in the
—Numbering method used for defining the interface
—Specific interface associated with this management
—Port speed auto-negotiation support
—Port speed auto-negotiation active status.
—Medium Attachment Unit (MAU) type. The MAU
—The maximum supported IEEE 802.3 frame
—Indicates whether the interface can be
—Indicates whether the interface is aggregated.
—Advertised aggregated interface ID.
—MED capabilities supported on the port.
—MED capabilities enabled on the port.
—Port speed auto-negotiation
8
86