Table of Contents
Advertisement
Spanning Tree Protocol
Configuring Multiple Spanning Tree
STEP 5
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
•
Type—Displays the MSTP type of the port.
-
Boundary—A Boundary port attaches MSTP bridges to a LAN in an
outlying region. If the port is a boundary port, it also indicates whether the
device on the other side of the link is working in RSTP or STP mode.
-
Internal—The port is an internal port.
•
Designated Bridge ID—Displays the bridge ID number that connects the
link or shared LAN to the root.
•
Designated Port ID—Displays the Port ID number on the designated bridge
that connects the link or the shared LAN to the root.
•
Designated Cost—Displays the cost of the port participating in the STP
topology. Ports with a lower cost are less likely to be blocked if STP detects
loops.
•
Remaining Hops—Displays the hops remaining to the next destination.
Click Apply. The Running Configuration is updated.
12
151
Advertisement
Table of Contents
