Table of Contents
Advertisement
IP Configuration
Configuring Domain Name System
STEP 2
STEP 3
STEP 4
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
•
Status— Displays the results of attempts to access the host (always shows
OK for static entries).
Click Add to add a host mapping.
Enter the following information:
•
IP Version—Select either Version 6 or Version 4 to define the IP address.
•
Host Name—Enter a user-defined host name or fully-qualified name. Host
names are restricted to the ASCII letters A through Z (case-insensitive), the
digits 0 through 9, the underscore and the hyphen. A period (.) is used to
separate labels.
•
IP Address(es)—Enter a single address or up to eight associated IP
addresses (IPv4 or IPv6).
Click Apply. The host mapping is added, and the Running Configuration is
updated.
15
179
Advertisement
Table of Contents
