Table of Contents
Advertisement
Status and Statistics
Managing RMON
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
•
Max No. of Samples to Keep—Enter the number of samples to store.
•
Interval—Enter the time in seconds that samples were collected from the
interface.
•
Owner—Enter the RMON station or user that requested the RMON
information.
Click Apply. The RMON history control sample is added, and the Running
Configuration is updated.
Click History Table to view the actual statistics.
Viewing RMON History Statistics
Viewing RMON History Statistics
The History Table page displays interface-specific statistical network samplings.
The samples are configured in the History Control Table described above.
To view RMON history statistics:
Click Status and Statistics > RMON > History.
Click History Table.
Select the entry number to display the samples associated with that history entry,
and click Go.
The following fields are displayed for the selected history sample:
•
History Entry No.—Number of the history entry.
•
Owner—History entry owner.
•
Sample No.—Statistics were taken from this sample.
•
Drop Events—Number of dropped packets due to lack of network
resources during the sampling interval. This may not represent the exact
number of dropped packets, but rather the number of times dropped
packets were detected.
•
Bytes Received—Number of octets received that including bad packets
and FCS octets, but excluding framing bits.
•
Packets Received—Number of packets received, including bad packets,
Multicast, and Broadcast packets.
2
28
Advertisement
Table of Contents
