Table of Contents
Advertisement
Managing VLANs
Configuring GVRP
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
To define the GVRP settings:
Click VLAN Management > GVRP Settings.
In the GVRP Global Status area, check Enable to enable GVRP globally.
Click Apply.
Select an interface type (Port or LAG), and click Go.
The following fields are displayed in the GVRP Setting Table:
•
Interface—Port or LAG number.
•
GVRP State—Displays whether GVRP is enabled or disabled on the
interface.
•
Dynamic VLAN Creation—Displays whether Dynamic VLAN creation is
enabled or disabled on the interface. If it is disabled, GVRP can operate but
new VLANs are not created.
•
GVRP Registration—Displays the VLAN registration mode on the interface.
To define the GVRP settings for an interface, select it and click Edit.
Enter the following information:
•
Interface—Select a port or LAG to be edited.
•
GVRP State—Check Enable to enable GVRP on this interface.
•
Dynamic VLAN Creation—Check Enable to enable Dynamic VLAN
Creation on this interface.
•
GVRP Registration—Select the VLAN Registration mode using GVRP on
this interface.
Click Apply. The GVRP settings are modified, and the Running Configuraion is
updated.
11
132
Advertisement
Table of Contents
