Status And Statistics; Viewing Ethernet Interface - Cisco 220 Series Smart Plus Administration Manual

Status and Statistics

Viewing Ethernet Interface

STEP 1
STEP 2
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
This chapter describes how to view switch statistics, and includes the following
topics:
• Viewing Ethernet Interface
• Viewing Etherlike Statistics
• Viewing TCAM Utilization
• Viewing Fan Status and Temperature
• Managing RMON
The Interface page displays traffic statistics per interface. The refresh rate of the
information can be selected. This page is useful for analyzing the amount of traffic
that is both sent and received and its dispersion (Unicast, Multicast, and
Broadcast).
To view Ethernet statistics and/or set the refresh rate:
Click Status and Statistics > Interface.
Enter the following information:
• Interface—Select the port or LAG for which the Ethernet statistics are
displayed.
• Refresh Rate—Select the time period that passes before the Ethernet
statistics are refreshed. The available options are:
- No Refresh
15 sec
- —Statistics are refreshed every 15 seconds.
30 sec
- —Statistics are refreshed every 30 seconds.
—Statistics are not refreshed.
2
18