Dish Network HDTV DVR Satellite Receiver User Manual page 78

Chapter 10
Operating Other Devices
Combination Devices
If you are programming the remote to operate a combination device, such as a TV/VCR or
a TV/DVD, program the remote control in one mode, and then repeat the procedure in the
other mode. For example, to program the remote to control a TV/VCR using code 748,
follow the instructions to program the remote to control the TV using code 748, and then
repeat the instructions for the VCR using the same code.
Programming Using Device Code Tables
Program the remote to control other devices using the device codes listed on page 115.
DVD
Turn the device on, using the device's front panel buttons or its remote control.
1
2 Find the brand name of the device in the codes insert packaged with the remote. If the
brand is not listed, see Programing using Device Codes Scan on page 71.
Press and hold the Mode button until all the other mode buttons light up, and then release
3
the button. The Mode button flashes. For example, hold TV for a TV until all of the other
mode buttons light. When you release it, TV flashes.
For AUX only. Press 0 for a second TV, 1 for a second DVD and/or VCR, 2 for a tuner or
4
amplifier, or audio receiver. If you are not programming in AUX mode, skip to step 5.
Enter one of the three-digit device codes for your brand from the table using the number
5
buttons. The three-digit device code should be for the brand name of your device that you
found in step 2.
6 If you want to program Limited Mode, press 1. If not, skep to step 7. See Limited Mode for
more information.
Press POUND (#). The Mode button flashes three times.
7
Press POWER to turn off the device. If the device does not turn off, go to step 10. If the
8
code works, the device turns off.
9 Turn the device back on and try some other buttons to make sure they work. If the code
works for other buttons, stop here. Sometimes POWER works when other buttons do not.
If in Limited Mode, try VOLUME or MUTE.
If the code does not work, repeats steps 3 through 9 with the next device code from the
10
tables. Try every code listed for your brand until one works for your device.
If you are unable to find a code that works, try Programming Using Device Codes Scan.
11
70
DVD
Find code in
Remote Codes
(separate
document)
DVD
Press
POWER to
see if device
turns off