Chapter 10
Improving Receiver Control
I
MPROVING
These instructions help you improve your remote control settings to best operate your
satellite receiver.
Making the Remote Work with the Receiver
These instructions configure your remote.
Turn your receiver
and TV on, and press
SYSTEM INFO on the
front of the receiver
Turn your receiver and TV on, and press SYSTEM INFO on the front of the receiver.
1
Confirm that you see the System Info screen.
2
Press RECORD on your remote. The receiver then matches the remote's address.
3
4
Confirm that your remote operates your receiver by pressing remote buttons. If this is not
working, go back to step 3.
Checking the Remote Control Address
Press and hold SAT for three seconds, until all of the Mode buttons light up, and then
1
release SAT.
2
Press POUND (#) twice. The SAT mode button flashes the same number of times as the
address number (for example, three flashes means address 3).
64
R
C
ECEIVER
ONTROL
Confirm that
you see the
System Info screen
Press RECORD.
The receiver then
matches the
Confirm that your
remote's address
remote operates your
receiver by pressing
remote buttons