Important Safety Instructions - Dish Network HDTV DVR Satellite Receiver User Manual

Important Safety Instructions

1
Read these instructions.
2
Keep these instructions.
3
Heed all warnings.
4 Follow all instructions.
5
Do not use the apparatus near water.
6 Clean only with a dry cloth.
7
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11
Only use attachments/accessories specified by the manufacturer.
12
Unplug the apparatus during lightning storms or when unused for long periods of time.
13
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as the power supply cord or plug is damaged, liquid has been spilled or objects
have fallen into it, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
14 The power plug must be readily accessible so that the apparatus can be easily disconnected from the AC
power.
15
The receiver is still connected to the AC power whenever it is plugged into a live power outlet, even if it is
turned off using the remote control or front panel buttons.
16
No flame sources, such as lit candles, should be placed on the equipment.
17 The apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases,
shall be placed on the top of it.
18
Operate the receiver using only the type of power source indicated on the marking label. Unplug the receiver
power cord by gripping the power plug, not the cord.
19
Do not overload wall outlets or extension cords; this can result in a risk of fire or electrical shock.
20
Never insert objects of any kind into the receiver through openings, as the objects may touch dangerous
voltage points or short out parts. This could cause fire or electrical shock.
21 Do not locate the antenna near overhead light or power circuits, or where it can fall into such power lines or
circuits. When installing the antenna, take extreme care to avoid touching such power lines or circuits, as
contact with them can be fatal.
22 Do not attempt to service the receiver yourself, as opening or removing covers may expose you to dangerous
voltage and will void the Limited Warranty. Refer all servicing to authorized service personnel.
23
Unplug the receiver from the AC power outlet before cleaning.
24
Do not place the receiver in an enclosure such as a cabinet without proper ventilation.
25
Do not install the receiver in any area where the temperature can be less than 40°F or more than 113°F. If the
receiver is cold to the touch, do not plug it in immediately. Let it sit unplugged at room temperature for at least
45 minutes before plugging it in.
v