Table of Contents
Advertisement
9.2
DOOR GLASS REPLACEMENT
CARE MUST BE TAKEN WHEN REMOVING AND DISPOSING OF ANY BROKEN DOOR GLASS OR
DAMAGED COMPONENTS. BE SURE TO VACUUM UP ANY BROKEN GLASS FROM INSIDE THE
DO NOT STRIKE, SLAM OR SCRATCH GLASS. DO NOT OPERATE APPLIANCE WITH GLASS
Having removed the door, lay on a smooth À at surface, face
down. There are 4 glass retainers that need to be bent
away from the glass to release it from the frame. Do not
pry on the glass.
When replacing DO NOT SUBSTITUTE MATERIAL,
replace the gasket (W562-0008) and the glass (W300-
0110). Set new glass into the frame and gently bend tabs
into the gasket to secure.
9.3
CARE OF STAINLESS STEEL
Stainless steel tends to oxidize or stain in the presence of chlorides and sul¿ des, particularly in coastal areas
and other harsh environments, such as the warm, highly humid atmosphere around pools and hot tubs. These
stains could be perceived as rust, but can be easily removed or prevented. To provide stain prevention and
removal, wash all stainless steel surfaces every 3-4 weeks or as often as required with fresh water and/or
stainless steel cleaner.
CLEANING THE STAINLESS STEEL SURFACE:
Do not use abrasive cleaners or steel wool on the stainless steel parts. Doing so will scratch the ¿ nish. Sur-
faces should be cleaned with warm soapy water while the metal is still warm to the touch. To clean stainless
surfaces, use a stainless steel or non-abrasive cleaner. Always wipe in the direction of the grain. Over time,
stainless steel parts discolour when heated, usually to a golden or brown hue. This discolouration is normal
and does not affect the performance of the appliance.
DO NOT USE SUBSTITUTE MATERIALS.
GLASS MAY BE HOT, DO NOT TOUCH GLASS UNTIL COOLED.
APPLIANCE BEFORE OPERATION.
REMOVED, CRACKED, BROKEN OR SCRATCHED.
WARNING
!
GLASS
* When installing the door glass ensure
that the gasketed end is placed into the
top of the door frame.
56.2
GASKET*
GLASS
RETAINERS
81.1
W415-0689 / C / 06.13.12
21
TOP
Advertisement
Table of Contents
