Deleting A Specified Destination Address; Registering/Editing Addresses - Konica Minolta BIZHUB C20 User Manual

6
Press the + or , key to select

Deleting a Specified Destination Address

A specified destination address (e-mail address, FTP address or SMB
address) can be deleted.
Changes made with this procedure will not be applied to the original
data (speed dial destination, group dial destination, etc.).
1
In the main screen (Scan mode), press the + or , key to select the cur-
rent data destination setting, and then press the Select key.
2
To delete an e-mail address, press the + or , key to select
, and then press the Select key. Then, press the + or , key to
EDIT
select the address to be deleted. To delete an FTP address or SMB
address, continue with step 3.
3
Press the Stop/Reset key.
4
Press the + or , key to select
The selected address is deleted.
If all specified addresses are deleted, the main screen is dis-
played.
5
To delete another address, repeat the procedure from step 2.
6
To finish deleting addresses, press the Back key.
7
Press the + or , key to select

Registering/Editing Addresses

Addresses can be registered/edited in the favorite list, as speed dial destina-
tions or as group dial destinations.
Addresses can also be registered/edited with PageScope Web Con-
nection or with LSU (Local Setup Utility) on the enclosed Applications
CD/DVD. For details, refer to the Reference Guide on the Documenta-
tion CD/DVD.
The same settings menu used to register/edit fax numbers is used to
register/edit addresses. For details on registering/editing fax numbers,
refer to the Facsimile User's Guide on the Documentation CD/DVD.
Scanning With the Machine
, and then press the Select key.
FINISH
, and then press the Select key.
YES
, and then press the Select key.
FINISH
CHECK/
185