Fan - HP EliteBook 820 G1 Maintenance And Service Manual

Fan

Description
For use only on computer models equipped with an AMD processor
For use only on computer models equipped with an Intel processor
Before removing the fan, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the service cover (see
components:
a. Battery (see
b. Hard drive (see
c. Keyboard (see
d.
Top cover (see
e.
Heat sink (see
Remove the fan:
1.
Turn the top cover upside down with the front toward you.
2. Disconnect the fan cable (1) from the system board.
3. Loosen the two Phillips captive screws (2) that secure the fan to the system board.
ENWW
Service cover on page
Battery on page 73)
Hard drive on page
Keyboard on page 85)
Top cover on page 94)
Heat sink on page 111)
71), and then remove the following
75)
Component replacement procedures
Spare part number
780895-001
730547-001
113