Card Reader Board - HP EliteBook 820 G1 Maintenance And Service Manual

4. Remove the TouchPad and cable (3).
Reverse this procedure to install the TouchPad.

Card reader board

Description
Card reader board (includes cable)
Before removing the card reader board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the service cover (see
components:
a. Battery (see
b. Hard drive (see
c. Keyboard (see
d. Top cover (see
108 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Service cover on page
Battery on page 73)
Hard drive on page
Keyboard on page 85)
Top cover on page 94)
71), and then remove the following
75)
Spare part number
730563-001
ENWW