Removal And Replacement Procedures For Customer Self-Repair Parts; Component Replacement Procedures; Service Cover - HP EliteBook 820 G1 Maintenance And Service Manual

5 Removal and replacement
procedures for Customer Self-
Repair parts
NOTE:
The Customer Self-Repair program is not available in all locations. Installing a part not
supported by the Customer Self-Repair program may void your warranty. Check your warranty to
determine if Customer Self-Repair is supported in your location.
NOTE:
HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and
then follow the on-screen instructions.

Component replacement procedures

This chapter provides removal and replacement procedures for Authorized Service Provider only parts.
There are as many as 15 screws that must be removed, replaced, and/or loosened when servicing the
computer. Make special note of each screw size and location during removal and replacement.

Service cover

NOTE:
The service cover spare part kit includes rubber feet.
Description
For use only on computer models equipped with an AMD processor
For use only on computer models equipped with an Intel processor:
For use only on computer models equipped with a TouchScreen display assembly
For use only on computer models equipped with a non-TouchScreen display assembly with a
CCCO mark
For use only on computer models equipped with a non-TouchScreen display assembly and with
RCTO
ENWW
Spare part number
766018-001
761780-001
730564-001
745308-001
Component replacement procedures
71