Display Assembly - HP EliteBook 820 G1 Maintenance And Service Manual

Display assembly

NOTE:
The TouchScreen display assembly is spared as a whole unit replacement. The non-
TouchScreen display assembly is spared at the subcomponent level only. For more display assembly
spare part information, see the individual removal subsections.
Description
12.5-in, AntiGlare, FHD, LED, UWVA, TouchScreen display assembly for use only on computer
models equipped with an AMD processor
12.5-in, AntiGlare, HD, LED, UWVA, TouchScreen display assembly for use only on computer
models equipped with an Intel processor
Before removing the display assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the service cover (see
components:
a.
Battery (see
b.
Hard drive (see
c.
Keyboard (see
d.
Top cover (see
Remove the display assembly:
1. Release the display panel cable from the routing clips (1) and channel built into the
base enclosure.
98 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Service cover on page
Battery on page 73)
Hard drive on page
Keyboard on page 85)
Top cover on page 94)
71), and then remove the following
75)
Spare part number
765606-001
761781-001
ENWW