General Copying Procedure - Toshiba e-studio 160 Operator's Manual For Copying Functions

1. GENERAL COPYING PROCEDURE

When originals are set and the
1
the initial (default) settings (*1). By selecting various copy modes, you can alter the number and type of
copies to be made.
2
The initial (default) settings of the digital multi function system at
the time of installation are as shown on the right. You can change
these initial settings.
3
*1 The copy modes that are automatically set when the power
is turned on or when the
control panel are called the initial (default) settings.
4
5
6
1
Place originals.
• When placing an original on the glass:
7
8
• When placing originals facing up in the automatic document
9
feeder (optional) or the reversing automatic document feeder
(optional):
10
11
12
2-2
HOW TO MAKE COPIES
key is pressed with all settings unchanged, copies are made using
Page 5-18
key is pressed on the
Copying Procedure
Page 2-6
Initial settings
Reproduction ratio ........... 100%
Copy quantity ................... 1
Automatic paper selection
1-side copies from 1-side originals
Automatic image density
Text/photo mode
Non-sort mode
Page 2-5
Slide
Automatic
document
feeder
Original
Original scale