Adding Staples - Toshiba e-studio 160 Operator's Manual For Copying Functions

5. ADDING STAPLES

Finisher (option for e-STUDIO200/250)
1
1 By pulling the lever, move the finisher away care-
fully from the digital multi function system.
2
3
4 2
Holding the sides of the staple cartridge, slide it out.
3 Turn the staple cartridge upside down.
5
6
4 Remove the empty staple case upward from the
staple cartridge.
7
8
9
5 Push in a new staple case into the staple cartridge
completely inside until a click is heard.
• Do not remove the seal holding the staples before the staple
case is set in the cartridge.
10
11
12
7-20
WHEN THE GRAPHIC SYMBOL FLASHES