User Test Mode; Automatic Test Mode; Auto Test - Toshiba e-studio 160 Operator's Manual For Copying Functions

1. AUTOMATIC TEST MODE

AUTO TEST

AUTO TEST mode, permits you to automatically perform a series of digital multi function system tests
1
in one operation.
The test items performed by the AUTO TEST are:
• FLASH ROM TEST
2
Checks the program data, function data, and language data.
• SRAM TEST
Checks the SRAM memory.
• DRAM TEST
Checks the DRAM memory
3
• MODEM TEST (Only when optional FAX kit is installed)
Checks the modem and detects line current.
• SCANNER TEST
Checks the image scanner.
4
• CODEC TEST
Checks the CODEC IC.
• PRINTER TEST
Checks the printer components for proper operation and prints one test page.
• PHONE BOOK DATA TEST (Only when optional FAX kit is installed)
5
Checks the phone book data.
• PCL BOARD TEST
Checks the optional PCL print kit.
6
Note
7
AUTO TEST cannot be performed if image data is stored in the memory.
1 Press the
8
9
2 Select "05.TEST MODE" and press the
10
3 Select "01.AUTO TEST" and press the
11
• "Auto Test" appears on the screen indicating that the test is
under way.
• When all the tests end, the word "Completed" is displayed
on the screen.
12
• The results of the auto test can be confirmed with the self
test report.
• If the result of the auto test is judged to be NG, call your
service representative.
8-2

USER TEST MODE

key to enter the program menu.
Page 8-12
PROGRAM
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
04.MENU LIST
05.TEST MODE
key.
TEST MODE
01.AUTO TEST
02.INDIVIDUAL TEST
03.TEST RESULT LIST
key.
AUTO TEST
-----------------------------